Philips CX50 Ultrasound Battery Bothell WA 98021 PNF41003143 PN
453561446193
► Brief Introduction
The new CX50 system is built on a new platform and architecture in
a small, compact design that is ideal for taking premium
performance anywhere you need it. PureWave, a clinically proven
imaging technology previously available only on Philips premium
systems, captures a broad band of tissue information for
exceptional clarity and information. AutoSCAN optimization and
Tissue Specific Imaging presets offer a new level of exam
automation – transducers are optimized by exam type, providing
excellent images with minimal adjustment. Highly configurable
portability enables you to study the most difficult-to-image
patients across a variety of clinical needs.
► Battery Operation
For portable operation, the system is powered by an internal
lithium polymer battery. To protect the battery and prolong its
life, follow these guidelines.
- Attempting to open the battery or incinerate it can result in
serious injury. Do not strike, puncture, drop, or throw the
battery.
- Do not immerse the battery in liquid or short the battery contacts
with liquid or metal objects.
- Keep the battery clean and dry.
- Keep the battery out of the reach of children.
- If a battery leaks or emits a strong odor, remove it from the
system and store it away from any ignition source. Avoid contact
with the fluid. If you get fluid on your skin, wash the area with
copious amounts of water and seek medical assistance.
- Do not charge or store the battery in direct sunlight or high
temperatures. For safe operating and storage temperatures.
► Specification
| Heat dissipation: | 700-1100 BTUs/hour |
| Operation range | 10˚C–40˚C operating in 15–95% |
► Battery Status
Indicates that the system is running on battery power and indicates
battery status.
- Five blue bands: Battery is fully charged.
- Four to two bands: Battery is partially charged.
- Single red band: Battery is nearly depleted and should be charged.
► Installing the Battery
Use the following procedure to install or remove a system battery.
1. Turn off the system and wait for it to finish powering down.
2. Close the system lid and then turn the system over.
3. Press the latch on the battery cover and lift the cover up and
away from the system.
4. Do one of the following:
•To remove the battery, lifting the connectorside of the battery
first, pull the battery out of the compartment.
•To install the battery, lower the side of the battery opposite the
connector into the compartment, and then push the connector side
into the compartment.
5. Replace the cover, ensuring that it latches securely.
Thank you for your time! If you are interested in Philips CX50 Ultrasound Battery Bothell WA 98021 PNF41003143 PN
453561446193, welcome to place your orders. Early order early shipment! If you
want to explore more details please let us know.
